PVC,PVG Solid Woven Flame Retardant Conveyor Belt

PVC,PVG Solid Woven Flame Retardant Conveyor Belt

Product Features:
The product consists of solid woven fabric dipped in PVC paste and adding PVC or PVG cover which are combined together by vulcanizing. The belt has good flame resistant and anti-static properties, with high tensile strength in proportion to weight, good integrity and no delimitation, excellent impact and rip resistance. The belt is much suitable to service in the conditions needing fire resistant and antistatic properties as coal mines, power stations, chemical and metallurgy industries.

monster belting_pvc

Solid woven belt with PVC cover.
Non pressed PVC type is suitable for applications in dry conditions at a slope angle of no greater than 16 degrees. The belt is non-pressed with cover no more than 0.8mm.

Pressed PVC type, both top and bottom covers are PVC, thickness of each side can be up to 4mm, the belt has much more advantages than non pressed PVC belt on impact resistance, water soaking, with longer service life, higher fastener holding.

monster belting_pvg

Solid woven belt with PVG cover 
PVG type is covered with covers mainly composed of rubber, which further improves the troughability, resistance to wetness and slip, resistance to low temperature, elongation and wear resistance of the belt. Both top and bottom cover are PVG, the belt can be used to carry materials mixing some water at the slope no more than 20 degree,elongate life of belt

PVC PVG conveyor belts

Features:
· Low stretch
· Low maintenance
· Anti-static
· Flexible
· Lightweight
· Impervious to moisture, acids, oils, gases, sunlight
· Excellent fastener holding
· Excellent resistance to tearing, peeling and impact
· Endless belt splicing
· Special wear resistant edge design

PVG BELTING _MONSTER BELTING
Characteristics:
· Anti slide caused by wetness good climbing capacity
· Low-temperature resistant
· Good elasticity, anti-impact
· Low elongation at rated load ,suitable for long distance conveying
· Tear resistant, good flexing capacity
· Long service life
Main physical properties:
Min.Tensile
Carcass thickness
Carcass weight
Carver grade and recommended thickness
Belt width
Recommended min pulley diameter
Strength(N/mm)
mm
Kg/m2
mm
mm
mm
Warp
Weft
Pressed PVC
PVG
500-2200
400
680/1
680
265
6.5
8.5
1.5+1.5
1.5+1.5
500
800/1
800
320
6.9
9
1.5+1.5
1.5+1.5
630
1000/1
1000
350
7.5
9.7
2+1.5
2+1.5
750
1250/1
1250
350
8.5
11
2+2
2+1.5
750
1400/1
1400
350
9
11.5
3+2
2.5+1.5
800
1600/1
1600
450
9.5
12.3
3+2
2.5+1.5
800
1800/1
1800
450
10
13
3+2
3+2
1000
2000/1
2000
450
10.5
13.6
3+2
4+2
1200
2500/1
2500
450
12.5
14.5
3+2
5+3
1500
3100/1
3100
450
17
17
Chosen based on conveyor systems
3500/1
3500
500
20
19
4000/1
4000
500
25
22
Mechanical properties of cover(DIN22109)
ITEM
Tensile strength MPa (min)
Elongation at break %(min)
Abrasive wear mm3(max)
PVG
15
350
200
PVC
12.5
300
200