Models:
• T1 type – *temperature of material up to 100°C
• T2 type – *temperature of material up to 125°C
• T3 type – *temperature of material up to 150°C
• T4 type – *temperature of material up to 175°C

Standards	Cover Rubber			Adhesion
Standards	Tensile Strength	Elongation at break	Abrasion	Cover to Ply	Cover to Ply	Ply to Ply
DIN 22102	Mpa	%	mm3	N/mm	N/mm (>1.5mm)	N/mm
DIN 22102-Z	15	350	250	3.5	4.5	5
DIN 22102-W	18	400	90	3.5	4.5	5
DIN 22102-Y	20	400	150	3.5	4.5	5
DIN 22102-X	25	450	120	3.5	4.5	5

Standards	Cover Rubber			Adhesion
Standards	Tensile Strength	Elongation at break	Abrasion	Cover to Ply	Cover to Ply	Ply to Ply
RMA	Mpa	%	mm3	N/mm (≤1.6mm)	N/mm (>1.6mm)	N/mm
RMA-I	17	400	200	3	4.4	4
RMA-II	14	400	250	3	4.4	4

Standards	Cover Rubber			Adhesion
Standards	Tensile Strength	Elongation at break	Abrasion	Cover to Ply	Cover to Ply	Ply to Ply
AS 1332	Mpa	%	mm3	N/mm (≤1.9mm)	N/mm (>1.9mm)	N/mm
AS 1332-N17	17	400	200	4	4.8	6
AS 1332-M24	24	450	125	4	4.8	6

Heat resistant rubber conveyor belt is suitable for conveying high temperature materials,such as cement clinker,sintering ore,carbon coke,coking coal,iron and steel casting,slag,cinders,metal powder in below industries:
1.The universal fabric conveyor belts are made of EP, NN or Cotton fabric and finished through the processes of calendaring, firming and vulcanizing, etc.
2.It is suitable to convey in normal temperature non-corrosive pointless lumps, granules or powders such as coal, coke, sand and cement in bulk or packaged.
3.Belts with cover grade are in accordance to International standards such as DIN 22102, RMA, AS 1332, SABS 1173/2000, IS 1891, BS 490, JIS K 6322, etc.
Application Industry
• chemical industry
• metallurgical industry
• heating stations, power plants
• cement plants,concrete plants
• thermoelectrical plant/cogeneration plant
• garbage incineration plant & recycling industry
• tunnel construction and road buliding industry
• steelworks, metal foundries, coking plant