China
China
Gulf
Pakistan
Iran
Russia
WeChat/WhatsApp/Mob +86 15964912185Email: sales@monsterbelting.com
WeChat/WhatsApp/Mob +97165231717 Address : P8-08-44, P.O Box. 513642, Sharjah Airport International Free Zone, United Arab Emirates.
WeChat/WhatsApp/Mob +92-51-2361407 IAS Trade Zone (Pvt) Ltd. is our Exclusive agency in Pakistan.
WeChat/WhatsApp/Mob +98 313 531 5580 – 82 Address: Isfahan Province, Isfahan, Khorasgan, Arghavanieh Blvd, Iran
WeChat/WhatsApp/Mob +7 (926) 734-96-63 Russian Federation, Moscow
Ceritified
ISO 9001:2008
The Best
#1 in China
Number #1
Suplier in region
Get A Quote

Sidewall Conveyor Belt Anatomy: Base Belt, Corrugated Walls and Cleats Explained

Most belts carry material along a flat path and never worry about where it goes. A sidewall belt can’t afford that. It has to lift sand, cement, coal or grain up a steep slope, sometimes straight up, without letting a single lump roll back or spill over the edge. That job looks simple from a distance. Up close, three separate parts are doing it, and when one of them is wrong, the whole belt struggles.

Monster belting | Sidewall Conveyor Belt Anatomy: Base Belt, Corrugated Walls and Cleats Explainedsidewall belt

People often buy the belt as one item and only learn about the parts later, usually when something spills.

What Is a Sidewall Conveyor Belt

A side wall conveyor belt is a flat base belt with corrugated rubber walls vulcanized along both edges and cross cleats molded between them. The walls form a flexible trough that moves with the belt, and the cleats make shelves that hold material in place on a slope. Together they let a conveyor climb at angles from about 30 degrees up to vertical, which a plain belt can’t do without the load sliding back.Sidewall Conveyor Belt

That’s why you see them where space is tight. A mine with a short run and a big height gain, a cement plant squeezing a feed line between existing buildings, a port moving fertilizer from a ship hold to a hopper. Instead of a long, gentle incline, the belt goes up in a small footprint.

Monster belting | Sidewall Conveyor Belt Anatomy: Base Belt, Corrugated Walls and Cleats Explainedcorrugated sidewall belt

side wall belt conveyorMonster belting | Sidewall Conveyor Belt Anatomy: Base Belt, Corrugated Walls and Cleats Explained

The catch is that it’s a system, not a product you pick off a shelf. The base belt, the walls and the cleats all have to be matched to the material and the layout. Get one wrong and the other two can’t make up for it.

Understanding the Base Belt in Sidewall Conveyor Systems

The base belt carries the load and pulls the walls and cleats around the circuit. It takes the tension, absorbs the impact of loading, and stays flat enough to seal against the walls. In most sidewall belts the base is a multi-ply belt with rubber covers top and bottom, built much like ordinary fabric conveyor belts, with a few differences that matter here.

Reinforcement is usually EP, meaning polyester warp and nylon weft. Polyester gives low stretch along the length, and the nylon weft gives flexibility across the width so the belt can bend around small pulleys. Extra transverse stiffness is often added to stop the base from cupping under the weight of the walls. Cover thickness depends on the material, so abrasive stone or sharp ore needs a thicker top cover than grain or sand.

Monster belting | Sidewall Conveyor Belt Anatomy: Base Belt, Corrugated Walls and Cleats ExplainedBase Belt in Sidewall Conveyor

sidewall conveyor belt Tension rating sets the maximum lift and capacity, so it should come from the real load, not a guess based on belt width. A base belt that’s too weak stretches, and a stretched base distorts the walls. One that’s too heavy costs you strength you don’t use and won’t turn the small pulleys sidewall systems depend on.

Technical data

Monster belting | Sidewall Conveyor Belt Anatomy: Base Belt, Corrugated Walls and Cleats ExplainedTechnical data

Textile carcass

Monster belting | Sidewall Conveyor Belt Anatomy: Base Belt, Corrugated Walls and Cleats ExplainedTextile carcass

Cleat Model

Monster belting | Sidewall Conveyor Belt Anatomy: Base Belt, Corrugated Walls and Cleats ExplainedCleat Model

Sidewall

Monster belting | Sidewall Conveyor Belt Anatomy: Base Belt, Corrugated Walls and Cleats ExplainedSidewall

What are the types of sidewall conveyor belt sidewalls?

Cleats and sidewalls are the second crucial element that makes sidewall a special item in the conveyor belt industry. As a matter of fact, according to conveyor system characteristics and the handled material as well, it is possible to choose between four different cleat options in terms of shape, thickness, size, and width as well as.

Here below, you can observe a summary of cleats’ different construction possibilities:

C type which is available in six different sizes

Monster belting | Sidewall Conveyor Belt Anatomy: Base Belt, Corrugated Walls and Cleats Explainedsidewall conveyor belt sidewalls

C type which is available in eight different sizes

Monster belting | Sidewall Conveyor Belt Anatomy: Base Belt, Corrugated Walls and Cleats Explainedsidewall conveyor belt

C type which is available in nine different sizes

Monster belting | Sidewall Conveyor Belt Anatomy: Base Belt, Corrugated Walls and Cleats Explainedside wall belt conveyor

XR CONSTRUCTION which is composed of only textile fabrics with high transversal stiffness, is provided by 2 additional special synthetic layers set in the cover rubber, assuring correct cross-stabilizing properties.XR CONSTRUCTION

SR CONSTRUCTION is composed of multi-ply synthetic carcass and suitable steel reinforcement to ensure high transversal stiffness for heavy industrial applications. The main difference between this construction, known as cross-rigid , and the previous one is the presence of a steel transversal reinforcement in the belt top cover, named breaker

Monster belting | Sidewall Conveyor Belt Anatomy: Base Belt, Corrugated Walls and Cleats ExplainedSR CONSTRUCTION

ST CONSTRUCTION stands for 100% steel carcass construction, and it is designed for the heaviest applications where conveying capacities are involved and required. Therefore, it is composed of steel longitudinal cords with special transversal steel reinforcement (breaker) to ensure the required stiffness.

Monster belting | Sidewall Conveyor Belt Anatomy: Base Belt, Corrugated Walls and Cleats ExplainedST CONSTRUCTION

The Role of Cleats in Sidewall Conveyor Belts

Monster belting | Sidewall Conveyor Belt Anatomy: Base Belt, Corrugated Walls and Cleats ExplainedRole of Cleats in Sidewall Conveyor Belts

Walls keep material in, but they do nothing to stop it sliding backward. That’s the cleats’ job. They’re rubber partitions molded across the base belt, and they turn the surface into a row of pockets, so the load is lifted instead of dragged.

Monster belting | Sidewall Conveyor Belt Anatomy: Base Belt, Corrugated Walls and Cleats Explainedfabric conveyor belts

Good sidewall belt conveyor design starts with the cleat, because it decides how much you carry per pocket and how well that load holds on the slope. The common profiles are T, TC and C. A T cleat is simple and suits light, free flowing material. TC cleats have a supporting base and are stiffer, so they’re the usual choice for heavier loads. C cleats are curved and suit fine or sticky material that needs to slide off cleanly at the top.

Monster belting | Sidewall Conveyor Belt Anatomy: Base Belt, Corrugated Walls and Cleats Explainedsidewall belt conveyor design

Spacing is a trade off. Closer cleats hold more securely on steep slopes but cut the volume per pocket and add belt weight. Wider spacing carries more per pocket but lets lumps roll. For big rock, a taller cleat with wider spacing usually works, and for fine powder you go closer. A cleat that’s too tall will also catch at the discharge and cause carryback.

This cross-stabilized construction is known as CROSSRIGID HR . For this specific high-tech item carcass construction must be designed and selected on every single project due to its particular features CROSSRIGID HR .

Another remarkable aspect to underline is that the base belt can be manufactured in abrasion-resistant, heat-resistant, flame-retardant, or oil-resistant rubber quality, depending on the concerned industrial application.

How Base Belts, Sidewalls, and Cleats Work Together

None of the three parts works well alone. The base belt provides strength, the walls give containment, and the cleats supply lift. Where they meet is where problems start, and most field failures I’d call avoidable come from a mismatch rather than a bad part. That’s what separates well specified Sidewall Belt Conveyor Systems from ones that spill and wear out early.

Width, wall height and cleat configuration are linked. A tall wall on a narrow belt makes a deep, narrow pocket that fills unevenly and is hard to empty. A wide belt with short walls spills at the edges once the load heaps up. Cleat height should always be a little lower than the wall, so material stays contained after it’s lifted.

Component Main job What goes wrong if it’s mis-specified
Base belt Carries load and takes tension Stretch, cupping, distorted walls
Corrugated walls Contain material on the incline Spillage, wall cracking at bends, bond failure
Cleats Lift and hold material on the slope Rollback, carryback, uneven discharge

Spillage tends to get blamed on the walls, but it often starts at the loading point. If the feed lands off center or too fast, the walls take the shock and the load jumps over them. A chute matched to the pocket width and belt speed does more for spillage than changing the belt.

Selecting Sidewall Conveyor Belt Components for Industrial Applications

Start with the angle. Up to about 60 degrees, walls and cleats of modest height do fine. Beyond that, toward vertical, you need taller cleats, stiffer TC profiles and tighter control of loading, because there’s no slope left to help the material stay put.

Then look at the material. Lump size, moisture, abrasiveness and temperature all change the answer. Sharp quartzite needs a thick abrasion resistant cover and sometimes a breaker, wet clay needs a smooth cover and a curved cleat that releases it, and hot clinker needs a heat resistant compound throughout, not just on the top cover. Give your supplier the real lump size and moisture, not the nominal figures from the design drawing.

Load and duty come next. Capacity, lift height, speed and hours per day set the strength rating of the base belt and the grade of the walls and cleats. Operating conditions such as cold, oil, dust and outdoor exposure should be mentioned up front, because they change the rubber compound for all three parts.

Last, ask for the base belt, wall and cleat specifications on one sheet and check that they come from the same maker and the same production process, since the bond between parts is where failures start. If you’re not sure where to begin, reach out to us with the material, lump size, incline angle, lift height and belt width, and we’ll suggest a configuration that fits.