China
China
Gulf
Pakistan
Iran
Russia
WeChat/WhatsApp/Mob +86 15964912185Email: sales@monsterbelting.com
WeChat/WhatsApp/Mob +97165231717 Address : P8-08-44, P.O Box. 513642, Sharjah Airport International Free Zone, United Arab Emirates.
WeChat/WhatsApp/Mob +92-51-2361407 IAS Trade Zone (Pvt) Ltd. is our Exclusive agency in Pakistan.
WeChat/WhatsApp/Mob +98 313 531 5580 – 82 Address: Isfahan Province, Isfahan, Khorasgan, Arghavanieh Blvd, Iran
WeChat/WhatsApp/Mob +7 (926) 734-96-63 Russian Federation, Moscow
Ceritified
ISO 9001:2008
The Best
#1 in China
Number #1
Suplier in region
Get A Quote

Cold Resistant Conveyor Belt Operating Reliably Below -40°C

frozen conveyorA conveyor belt that runs fine at -10°C can start cracking where it flexes once the temperature falls to -40°C. Nothing about the belt changes overnight, but the rubber does. It loses its give, the cover tightens, and a belt that bent around the head pulley all summer starts to fight every turn. A cold resistant conveyor belt is built to avoid this, with a rubber compound that stays elastic long after ordinary belting has stiffened up. Plenty of plants find out the hard way, usually on the first really cold morning of the year, with a frozen conveyor and a queue of trucks waiting.Cold Affects Conveyor Belt

How Extreme Cold Affects Conveyor Belt Performance

Rubber is a polymer, and polymers get stiff as they cool. Below a certain point, known as the glass transition temperature, the molecular chains that give rubber its stretch basically stop moving. Ordinary belt covers start losing flexibility well before that, often somewhere between -20°C and -30°C depending on the compound. By -40°C a standard belt behaves less like rubber and more like a stiff plastic strap.

The first sign is usually a cold start. The belt has sat overnight, the drive pulls, and the whole loop resists. Motors draw more current, the belt wraps the pulleys awkwardly, and the cover can crack where it bends hardest, typically at the head and tail pulleys and along the edges. Hairline cracks in the top cover are easy to miss in the dark, but they let moisture in, and freeze-thaw cycles pry them wider every day.

Outdoor sites make it worse. Northern mines, open pit operations and exposed transfer towers deal with wind chill, snow and ice on the return side. Material often arrives frozen in lumps, so the belt takes hard impacts at exactly the moment it is least able to flex. Stiff rubber and hard loading together are what finish most belts that were never specified for the climate.

Monster belting | Cold Resistant Conveyor Belt Operating Reliably Below -40°COrdinary belt

Monster belting | Cold Resistant Conveyor Belt Operating Reliably Below -40°CConveyor Belt Suitable for Below -40°C

What Makes a Conveyor Belt Suitable for Below -40°C

It starts with the rubber compound. Cold resistant covers are typically built on natural rubber blended with polybutadiene or similar polymers, along with plasticizers that keep the chains moving at low temperatures. The recipe is a trade off, because compounds that stay soft in deep cold can give up some abrasion resistance. The formulation has to match the job, not just the thermometer.

What you want is elasticity retained at the rated temperature, not just a number on a brochure. Ask for low temperature test data, such as brittleness temperature or flexing results, instead of accepting a generic “cold resistant” line on a datasheet. A belt that passes a cold bend test at -40°C is a different product from one that only claims to.

Construction matters just as much. A fabric carcass such as EP handles cold flexing well, but thick, heavily plied belts are stiffer in the cold than thinner ones, so extra plies add strength and stiffness together. Cover thickness, edge finish and splice method all play a part too. Don’t confuse this with a heat conveyor belt, which is engineered for the opposite problem and uses different polymers. A belt built for hot clinker will not behave well at -40°C.heat conveyor belt

Common Conveyor Belt Problems in Cold Climates

Stiffness is the root of nearly everything else. After days at -35°C or colder, the whole belt has cooled through its thickness, so it no longer lies flat in the trough. It rides high on the idlers, bridges the gaps between them, and wanders because it doesn’t conform to the troughing angle. Tracking problems that never appeared in summer start showing up in January.

Cracks follow. They begin at the edges, where the cover is thinnest and flexing is concentrated, then at joints, where two different stiffnesses meet. A mechanical splice that looked fine in autumn can pull its fasteners out of cold, hard rubber. Vulcanized joints usually hold up better, but only if they were made properly in the first place, and doing that outdoors in winter needs a heated enclosure.

Pulleys and rollers add their own trouble. Grease thickens, bearings drag, and a seized idler becomes a friction point on a belt that can’t tolerate abrasion. Material behaves differently too. Wet fines freeze onto the belt surface, carryback builds up on the return run, and the frozen layer scars the cover. A stiff belt carrying frozen material is much harder on a conveyor than a warm one carrying the same load.Conveyor Belt Problems in Cold Climates

Choosing the Right Cold Resistant Conveyor Belt

Choosing a cold conveyor belt starts with the coldest temperature your site actually sees, not the average. Look at the lowest recorded reading, then add wind exposure and any time the belt sits idle outdoors. If your site hits -42°C once every few winters, a belt rated for -40°C is cutting it close, and you are better off asking for a rating with some margin.

Next comes the material. Sharp, heavy lumps need a tougher cover and often a breaker layer, while fine, wet material needs a cover that resists both abrasion and moisture. Belt strength depends on length, lift and capacity, and a low temperature rating doesn’t change that calculation. You still need the tension rating that your drive and conveyor profile demand.

Site condition Typical problem What to ask the supplier for
Down to about -25°C Slow stiffening, minor edge cracking Cold grade cover with low temperature test data
-25°C to -40°C Poor trough fit, cracking at joints Cold resistant compound, thinner carcass where possible, vulcanized splice
Below -40°C Brittle cover, drive overload at startup Extreme cold compound tested at your minimum temperature, written startup procedure

Be careful with other materials. Some PVC conveyor belts work very well underground, where temperatures stay moderate, but PVC hardens quickly in surface cold. A solid woven PVC belt is not automatically a cold weather belt, so check the datasheet for the real minimum temperature before it goes on an exposed conveyor.

Monster belting | Cold Resistant Conveyor Belt Operating Reliably Below -40°CPVC conveyor belts

Whatever the supplier tells you, get the minimum operating temperature, the test method behind it, and the storage and handling limits in writing. A reputable manufacturer will give you those numbers without argument. If they won’t, that tells you something.

Monster belting | Cold Resistant Conveyor Belt Operating Reliably Below -40°CPVC belt

Installation and Maintenance in Freezing Conditions

Check the belt before every cold startup, especially after a long stoppage. Flex a section by hand if you can reach it, and look at the cover for cracks, particularly at the edges and around the joints. A belt that feels like a board shouldn’t be started at full speed.Maintenance in Freezing

Start gradually. Run the conveyor empty at low speed for a while, if your drive allows it, so the belt warms from movement before it carries a load. Then bring material on in steps. Tension needs attention as well, because the belt contracts as it cools and a take-up set in summer can be far too tight in January. Gravity take-ups adjust themselves, but screw take-ups need someone to go and look.

Monster belting | Cold Resistant Conveyor Belt Operating Reliably Below -40°Cbelt contracts

Walk the line checking pulleys, rollers and frame. Replace seized idlers before winter, use low temperature grease, and clear ice off the return side and pulleys before it pushes the belt off track. Keep scrapers set properly so carryback doesn’t freeze into a hard layer, and watch the edges closely during the first cold week. Cracks that start small in the cold tend to grow every time the belt cycles.

Monster belting | Cold Resistant Conveyor Belt Operating Reliably Below -40°Cpulleys, rollers and frame

Where Cold Resistant Conveyor Belts Are Used

Monster belting | Cold Resistant Conveyor Belt Operating Reliably Below -40°CCold Resistant Conveyor Belts Are Used

Northern mining is the obvious home. Open pit and surface operations in Siberia, northern Canada, Mongolia and Scandinavia run conveyors outdoors through months of deep cold, moving ore, coal and overburden. Mineral processing plants with exposed transfer points and long overland conveyors face the same conditions.

Monster belting | Cold Resistant Conveyor Belt Operating Reliably Below -40°Clong overland conveyors

Quarries and aggregate yards in cold regions need them too, along with port terminals, grain and fertilizer facilities, and industrial sites where conveyors run outside or through unheated galleries. Even places that aren’t Arctic, like high altitude sites, can drop low enough overnight to cause trouble.

Technical : 5 plies of TK-200-2 synthetic fabric, minimum warp tensile strength 200 N/mm per ply; Г-1 rubber cover grade; top cover 6 mm, bottom cover 3.5 mm; rubber covers on both sides, molded rubber edges, and a protective or breaker ply beneath the top cover. Heavy-duty service for coal lumps up to 700 mm and rock lumps up to 500 mm. Ambient temperature: −25°C to +60°C.

belt designations and roll lengths:

  • 1.2Ш-1400-5-ТК-200-2-6-3,5-Г-1: 2 rolls — 284.29 m and 90 m; 524 m².
  • 1.2Ш-1200-5-ТК-200-2-6-3,5-Г-1: 9 rolls — 241.67 m, 110 m, 110 m, 96.67 m, 216.67 m, 383.33 m, 240 m, 83.33 m and 295 m; 2,132 m².
  • 1.2Ш-800-5-ТК-200-2-6-3,5-Г-1: 1 roll — 156.25 m; 125 m².

The right belt usually pays for itself in the first winter, mostly by avoiding stoppages. A frozen conveyor can idle an entire operation, and one cracked belt costs far more than the price gap between a standard and a cold grade. If you’re planning a cold climate project or replacing a belt that keeps cracking, contact us with your minimum temperature, material, belt width and conveyor length, and we’ll recommend a suitable compound and construction.