Straight Warp( SW ) Conveyor Belt is suitable for conveying large drop height, large load and high speed in occasions. This belt is widely used in mining, electricity and ports industries.
This belt adapts 1-2plies SW canvass to replace multiplies EP or Nylon canvass, which can save 7-17% full thickness, to improve the sinuosity of the belt. I can make the belt run well with smaller pulleys, which make the length of the belt reach 400-500meters, to save the loss of the production.
With special weaving method, SW fabric layer has a good performance of high tension strength, and the working elongation of the belt can be reduced a lot. The special structure of straight warp can absorb impact higher than EP or Nylon material, which prolong the service life of the belt.
| SW | STRENGTH | APPLICABLE RUBBER GRADE | APPLICATIONS |
|---|---|---|---|
| FABRIC X PLIES | (KG/CM, KN/M, N/MM) | ||
| SW400 x 1P | 400 ↑ | Abrasion Resistant | Steel |
| SW630 x 1P | 600 ↑ | Oil Resistant | Mining |
| SW800 x 1P | 800 ↑ | Flame Resistant | Coal |
| SW1000 x 1P | 1000 ↑ | Cold Resistant | Cement Plant |
| SW400 x 2P | 800 ↑ | Heat Resistant | Paper Industry |
| SW630 x 2P | 1200 ↑ | Impact Resistant | Port |
| SW800 x 2P | 1600 ↑ | Chemical Resistant | Power Plant |
| SW1000 x 2P | 2000 ↑ | Anti-Static Resistant | Impact Conveying |
| Heavy Industry |
Note: It can be customized according to the customers’ requirements. Rubber cover quality of conveyor belt of different standard for choice:
To compare with the belts having the same grade of the tensile strength, the SW belt provides 10%~20% less weight, power saving to minimize the load of conveyor accessories, so as to reach the efficiency of saving power source and cost down.
Use one or two plies replace the multi-plies construction make total thickness 7%~17% thinner, increase the strength smoothly under the smaller. This can help the belt running smoothly under the smaller pully. Each roll length can be 400~500m to reduce the waste.
Use a special weave type of high-denier fiber to raise the tensile strength of the fabric, reduce the working elongation and replace the Mulit-plies construciton belts.
The special construction of the Straight Warp provides more impact absorption than EP or NN products, and increase the belt service life.
Parallel planes of heavyweight, high-strength yarns together with a binder yarn, develop a total departure from the traditional plies belt concept and constructions. It is designed to carry a large capacity of material, such as logs or crushed stone, have Superior endurance performance in rugged environment.
Exceptional resistance to abrasion, cutting and snagging. Flexural fatigue and impact resistance is much better than the normal fabric. High-carrying capacity and very low stretch.
