Cold vulcanizing cement is a two-part cold vulcanizing cement based on CR (polychloroprene rubber). Bonds rubber to rubber, rubber to fabric, rubber to metal, fabric to fabric, metal to fabric.
Cold vulcanizing cement including adhesive and hardener, non flammable, repair and joining of rubber-fabric conveyor belts, rubber coating of metal surfaces, pulley lagging.
Advantages of Cold conveyor belt repair adhesive :
1 Non-flammable.
2 Fast speed of solidifying, high intension, anticorrosion, resistance to aging in normal temperature.
3.Easy operation and low cost.
Using methods of conveyor belt repair adhesive :
1 Mixing SK316-A adhesive and SK316-B hardener to homogenize according to proportion, paint dry joint surface three times, and agglutinate when impregnant volatilizes to feel toughness.
2Leveling the joint when agglutinating, splice from the front to the back, press two or three times from the middle to the surrounding with hand hammer to remove the air
3 Keeping it in twenty minutes after splicing the joint, cool it to the room temperature to clean the site. That will be better if extend the solidifying time.
Attention:
Cold vulcanizing solution SK316 contents methylenechloride and may cause vapor pressure in heat. Avoid hot storage.Cool down to room temperature before use. Open tins,cans or drums carefully when cement was hot!
