Conveyor belt resistant against abrasion
1.We are a manufacturer who has almost ten years produce experience with best production capability and strictly quality control center.
2.We have advanced production equipment and testing equipment.
3.We have certificates by well-known standards.
4.All Material we use is of high or medium quality and environment friendly. And we ensure 100% QC inspection before shipment.
5.We have strong and responsible team who can ensure our product quality and provide best service.
Conveyor belt resistant against abrasion
1. Polyester conveyor belt, also called EP or PN conveyor belt, whose tension resistant body is canvas woven by polyester in warp and polyamide in weft.
2. The belt has the characteristics of low elongation in warp and good troughability in weft, good water resistance, good wet strength, suitable for medium, long-distance and heavy-load transportation of materials
3.Because of the high initial modulus of polyester, the belt can choose a relative low safety factor.
4.Suitable for Medium, Long distance and Heavy-load transportation of materials like Aggregate, Cement, Coal, Foundry Coal, Grains, Hard Rock, Wood products, Sand and Gravel, Steel products, etc.
Application:
Suitable for conveying heavy duty, high abrasion and massive density materials in a critical industrial environment.
Characteristics:
Superior Physical Properties of the cover rubber
Anti-impact and avulsion resistant
High adhesion, small elongation
Ozone/ ultraviolet radiation and corrosion resistant
Specifications:
| Type | High abrasion resistant | |
| Longitudinal full thickness tensile strength (KN/m) |
800~3500 | |
| Longitudinal elongation | <=1.2% | |
| Rubber thickness (mm) | top | 6~10 |
| bottom | 1.5~4.5 | |
| Rubber abrasion | Type 1 | <=0.15cm3/1.61KM |
| Type 2 | <=0.30cm3/1.61KM | |
| Adhesion (N/mm) | >=12 | |
| Width (mm) | 300~2000 | |
| Length/Roll (m) | <=200 | |
| Standard | GB7984, AS1332, BS490 | |