Steep Angle side wall conveyor belt

Steep Angle Side wall Conveyor Belt, Nylon Conveyor Belt, Rubber Conveyor Belts Manufacturer

1. Applications

Steep Angle side wall Conveyor Belt is normally used for transportation at angle up to 90 degree. It also used together with belt conveyor for horizontal & short-distance transportation. (no cleats the moment)

The belt is twice vulcanized through base belt (trough degree≤0.03), sidewall, cleat (no cleat needed when horizontal transportation).

2. Structure

Side wall conveyor belt consists of base belt, sidewalls and cleats. There are usually transverse steel wire reinforcement inside top & bottom covers of the base belt.

Usage

In order to prevent the conveying materials scattering due to site restrictions or the requirement for lifting materials with large dip angle, the Steep Angle Sidewall Conveyor Belt must be able to withstand the extremely high stress and repeated flexing that occurs in high capacity, steep angle conveying. It is specially designed by MONSTER BELTING engineers by using polyester fabrics with the highest quality and extremely low elongation to provide higher rigidity value. This product is suitable for conveying materials under the condition of large dip angle (0°-90°).

Side wall Conveyor Belt Characteristics

• Materials can be conveyed at a large slope up to 90°.
• The belt has large loading capacity and the materials won’t be scattered.
• The slope of conveying can be changed from horizontal to sloping, or from sloping to horizontal.
• The conveyor is simple in structure, flexible in arrangement and occupying only a small area.

 

Sidewalls
The sidewalls are molded in a high-quality rubber.
It’s available in two types:
Rubber (BG)
Rubber with fabric reinforcement (BGT)

 

Cross Rigid Base Belt、Sidewalls: The Complete Range、Cleat Range
Product
Cross Rigid Base Belt

Base belt tyoe	strength(N/mm)	Coveyor thickness(mm)	Weight（kg/㎡）	Min pultey diameter(mm)
	250/2	2:02	9.4	200
XE	400/3	4:02	13.5	315
	500/3	4:02	13.75	400
	630/4	4:02	15.2	500
	800/5	4:02	16.85	630
	400/3+2	4:02	12.1	315
XE+2	500/3+2	4:02	12.6	400
	630/4+2	4:02	14.4	500
	800/5+2	4:02	16.1	630
	1000/5+2	4:02	17.8	800
	1250/5+2	4:02	18.25	1000
	315/2+2	4:02	13.7	315
XE-SC+2	400/3+2	4:02	14.5	315
	500/3+2	4:02	15.2	400
	630/4+2	4:02	16.7	500
	800/5+2	4:02	18	630
	1000/5+2	4:02	19.5	800
	1250/5+2	4:02	21.4	1000
	1600	8:08	Please Inquire	1250
XST-SC	2000	8:08		1250
	2500	8:08		1400
	3150	8:08		1400
	3500	8:08		1600
	4500	8:08		1600