Buy Heavy-Duty Fabric Conveyor Belts

Multiply Fabric Conveyor Belts

Multiply fabric conveyor belt made of nylon fabric,SBR/NBR/EPDM rubber,high tensile strength, abrasion/oil/heat/wear resistant, pattern belts is available. General-purpose belt, Fire-resistant , Cold-resistant Wear-resistant type, Heat-resistant type, Acid and alkaline resistant type, Oil-resistant type, Antistatic electricity type, High-grade type and etc.

Specifications:

This is a polyester conveyor belt rubber that is made from structured weft and warp. We are nylon fabric conveyor belt manufacturer. This fabric conveyor belts is known for its high strength, resistance to wear and fatigue resistance. The fabric belt conveyor is used through various conditions for long-distance transportation and it is used in most industries including construction, ports, among others.

Applications:

Our multiply fabric conveyor belts are suitable for shifting loose, relative big density type big, middle, and small mineral locks, coal materials etc. Rubber conveyor belting has a relatively big impact on force and abrasion. Not Suitable for hot and oily materials conveyor .Especially suitable for working in severe environment, which requires relatively high belt dimension stability.

Specification and technical data of conveyor belt rubber

Fabric type	Fabric structure		Fabric specs	Ply thickness	Strength(N/mm)				Cover thickness		width	length
Fabric type	warp	weft	Fabric specs	mm/ply	2ply	3ply	4ply	5ply	upper	lower	mm	m
polyester	polester	polyamine	EP80	0.95	160	240	320	400	1.5-12	0-4.5	400-2500	50-500
			EP100	1	200	300	400	500
			EP150	1.1	300	450	600	750
			EP200	1.2	400	600	800	1000			500-2500
			EP250	1.35	500	7500	1000	1250
			EP300	1.45	600	900	1200	1500
			EP350	1.6	–	1050	1400	1750			800-2500
			EP400	1.75	–	–	1600	2000			1000-2500
			EP500	1.9	–	–	2000	2500
			EP630	2.1	–	–	2400	3000

Adhesion and elongation of rubber conveyor belting

The standard fabric type: ( It can be customized according to the customer’s requirements )

The belt whole Tensile Strength (KN/m)
	EP250/2	EP315/3
400	EP400/2	EP400/3	EP400/4
500	EP500/3	EP500/4	EP500/5
630	EP630/3	EP630/4	EP630/5
800	EP800/4	EP800/5	EP800/6
1000	EP1000/4	EP1000/5	EP1000/6
1250	EP1250/4	EP1250/5	EP1250/6
1600	EP1600/4	EP1600/5	EP1600/6
2000	EP2000/4	EP2000/5	EP2000/6
2500	EP2500/5	EP2500/6
3000	EP3000/5	EP3000/6

Cover rubber Grade

The standard rubber quality grade : ( It can be customized according to the customer’s requirements )

Cover Grade	Applicable Standards	Tensile Strength (MPA)	Abrasion Loss (mm3)	Elongation at break (%)	Application charecteristics	Reference Materials
DIN X	DIN 22102	25	120	450	Suitable to convey moderately sharp abrasive material with cut gouge property under heavy duty applications	Iron ore,Coal,Lignite,Copper,Limestone,Blast Furnace Slag, Stone,Rock etc
DIN M	DIN 22102	24	125	450	Suitable to convey moderately sharp abrasive material with cut gouge property under heavy duty applications	Iron ore,Coal,Lignite,Copper, Limestone,Blast Furnace Slag, Stone,Rock etc
DIN Y	DIN 22102	20	150	450	Suitable to convey moderately sharp abrasive material under medium duty applications	Coal,Lignite,Limestone, Gypsum,Potash etc.
DIN W	DIN 22102	18	90	400	Highly Abrasive materials with Cut Gouge property	Sharp big lumps of iron Ore, Rock Phosphate etc
DIN N	DIN 22102	17	150	400	Suitable to convey moderately sharp abrasive material under medium duty applications	Coal,Lignite,Limestone, Gypsum,Potash etc.
DIN Z	DIN 22102	15	250	350	Suitable to convey less Abrasive and Smaller Lump Fine material	Sand,Cement,Slacked Lime, Wood Chips,Pulp (Dry)
DIN K	DIN 22102	20	150	400	1.Average value of duration of flame of 6 test pieces with covers does not exceed 45S. 2.Single samples not exceed 15S. 3.Anti-Static property ≤ 3*108Ω
MOR	DIN 22102	14	200	350%	Moderatly oil resistant. Suitable for material consisting of animal fat or vegetable oil, Swelling in IRM903 oil (22h,100℃) Max,+50%	animal fat or vegetable oil
OR	DIN 22102	16	160	350%	IRM903 oil (22h,100℃) Max,+5%	Gasoline engine oil is refined petroleum.
T1	DIN 22102	15	200	350%	Working arrange: +100°C short time 125°C	Raw material: SBR
T2	DIN 22102	15	200	350%	Working arrange: +125°C short time 150°C	Raw material: SBR
T3	DIN 22102	15	200	400%	Working arrange: +150°C short time 180°C	Raw material: EPDM
T4	DIN 22102	15	200	400%	Working arrange: +180°C short time 250°C	Raw material: EPDM
RMA1	RMA	17	150	400	Suitable to convey moderately sharp &abrasive material under medium duty applications	Coal,Lignite,Limestone, Gypsum,Potash etc.
RMA 2	RMA	14	250	350	Suitable to convey less Abrasive and Smaller Lump&Fine material	Sand,Cement,Slacked Lime, Wood Chips,Pulp (Dry)
AS N	AS 1332	17	200	400	Suitable to convey less Abrasive and Smaller Lump Fine material	Coal,Lignite,Limestone, Gypsum,Potash etc.
AS M	AS 1332	24	125	450	Suitable to convey moderately sharp abrasive material with cut gouge property under heavy duty applications	Iron ore,Coal,Lignite,Copper, Limestone,Blast Furnace Slag, Stone,Rock etc
H	ISO14890: 2013	24	120	450	Suitable to convey moderately sharp abrasive material with cut gouge property under heavy duty applications	Iron ore,Coal,Lignite,Copper, Limestone,Blast Furnace Slag, Stone,Rock etc
D	ISO14890: 2013	18	100	400	Suitable to convey moderately sharp abrasiven material with cut gouge property under heavy duty applications	Iron ore,Coal,Lignite,Copper, Limestone,Blast Furnace Slag, Stone,Rock etc
L	ISO14890: 2013	15	200	350	Suitable to convey less Abrasive and Smaller Lump Fine material	Sand,Cement,Slacked Lime, Wood Chips,Pulp (Dry)

Cover rubber Grade

Fabric type	Fabric Structure		Fabric specs	Strength series					Cover thickness		Width	Length
Fabric type	Wrap	Wrap	Fabric specs	2 ply	3 ply	4 ply	5 ply	6 ply	Upper	Lower	Width	Length
Nylon (NN)	Nylon (N)	Nylon (N)	NN-100	200	300	400	500	600	1.5-8	0-4.5	300~2500	≤300
			NN-125	250	375	500	625	750
			NN-150	300	450	600	750	900
			NN-200	400	600	800	1000	1200			300~2500
			NN-250	500	750	1000	1250	1500
			NN-300		900	1200	1500	1800
			NN-350		1050	1400	1750	2100			300~2500
			NN-400			1600	2000	2400
			NN-500			2000	2500	3000

Specification:

Spec		NN-80		NN-100		NN-125		NN-150		NN-200		NN-250		NN-300		NN-400		NN-500
Item	unit	warp	weft	warp	weft	warp	weft	warp	weft	warp	weft	warp	weft	warp	weft	warp	weft	warp	weft
Frame	dtex	930	930X1	930	930X1	1400X1	1400X1	1870X2	1400X1	1800X2	1870X2	1400X4	1870X2	1870	1400	1870	1870	1870X4	1870X2
Frame		X1		X1										X4	X2	X3	X2
Density	radical	175	170	196	78	150	60	135	68	176	60	145	60	136	44	120	36	120	38
Density	/10cm	±2	±2	±2	±2	±2	±2	±2	±2	±2	±2	±2	±2	±2	±2	±2	±2	±2	±2
Average breaking strength≥	N/mm	110	50	130	50	155	60	178	68	230	80	285	80	375	90	470	90	565	105
Breaking strength(min)≥		100	45	115	45	135	50	160	60	215	70	260	70	350	80	440	80	520	90
Elongation at 10% load≤	%	2.5		2.5		2.5		2.5		2.5		2.5		2.5		3		3
Elongation at 10% load≤
Elongation at break≤	%	20	60	20	60	20	60	20	50	25	40	25	40	25	40	25	40	25	40
Drying shrinkage % ≤(150ºC*30min)	%	5.5	0.5	5.5	0.5	5.5	0.5	5.5	0.5	5.5	0.5	5.5	0.5	5.5	0.5	6	0.5	6	0.5
Uneven drying shrinkage ≤	%	10		10		10		10		10		10		10		10		10
Adhesion strength≥	N/mm	7.8		7.8		7.8		7.8		7.8		7.8		7.8		7.8		7.8
Weight (grams per m2)	g/m2	260±10		305±15		345±20		390±25		500±30		580±35		690±30		830±35		1200±50
Thickness	mm	0.45±0.05		0.50±0.05		0.55±0.05		0.65±0.05		0.85±0.05		0.90±0.10		1.20±0.10		1.35±0.12		1.40±0.14
width	mm	0 0		0 0		0 0		0 0		0 0		0 0		0 0		0 0		0 0
		800~1400		800~1400		800~1500		800~1600		800~1600		800~1600		800~1600		800~1600		800~1600
		-40		-40		-40		-40		-40		-40		-40		-40

Multiply fabric conveyor belt Selection

DIN STANDARD	12Mpa	Z	N	W	Y	X
Tensile strength:min.	12Mpa	15MPa	17MPa	18MPa	20MPa	25MPa
Abrasion Loss: max.	280mm3	200mm3	170mm3	90mm3	150mm3	120mm3
Belt Spec. Molded edge
EP250/2-3+1
EP315/2-3+1
EP315/2-4+2
EP400/3-4+2
EP400/3-6+2
EP500/4-5+2
EP630/4-6+2
EP630/4-8+3
EP800/4-6+2
EP800/4-8+3
Please tell us your specification for quotation.

RMA STANDARD		RMA-II	RMA-II	RMA-II	RMA-1	RMA-1	RMA-1
Tensile strength:min.		12Mpa	14MPa	15MPa	17MPa	20MPa	25MPa
Abrasion Loss: max.		280mm3	150mm3	200mm3	180mm3	150mm3	120mm3
Belt Spec. Cut edge
2Ply220PIW	1/8 x 1/16″(3.2+1.6)
(EP200 x 2)	3/16 x 1/16″(4.8+1.6)
3Ply330PIW	3/16 x 1/16″(4.8+1.6)
(EP200X3)	1/6 x 1/16″(6.4+1.6)
4Ply440PIW	3/16 x 1/16″(4.8+1.6)
(EP200X4)	1/6 x 1/16″(6.4+1.6)
3Ply600PIW	1/6 x 1/16″(6.4+1.6)
(EP350X3)	3/8 x 1/8″(9.6+3.2)

Please tell us your specification for quotation.

Frequently Asked Questions

1. How to store polyester conveyor belts?

Follow the below suggestions/guidelines for storage;

Store in a dark room to protect from UV light, moisture & humidity,
Use plastic wrap,
Avoid exposure to extreme temperatures,
Keep small belts in airtight plastic bags, and
Lay heavy belts on soft rubber foam bedding.

2. How can I repair nylon fabric conveyor belts?

Follow our 9-steps guide to perform minor repairs on-site in case of damage, click here. For more information, contact us.

3. How to clean conveyor belts?

Here are the general cleaning tips for conveyer belts:

Clean before installation
Use a soft cloth to wipe light dirt deposits
Shift to scrubbing for heavy soiling
Make sure to dry belts after cleaning

4. Is cassette packaging available for fabric conveyor belts?

Yes. We can deliver your order in cassette packaging if asked to avoid abrasion.

Related products:

Anti-tear Fabric Conveyor Belt ,Textile Fabric Conveyor Belts ,Mulity-ply Fabric Conveyor belts ,Polyester Fabric Belt Conveyor ,EP / NN / CC fabric rubber conveyor belts ,Cement, quarry plant, industrial fabric canvas conveyor belt ( EP/NN/CC) ,Plied Textile Conveyor Belt ,Layer Fabric Cord Belt ,PN POLYESTER NYLON CONVEYOR BELTING ,EP100 4PLY 4.5+1.5mm conveyor belt ,EP300/5 conveyor belts,20mpa , Manufacturer of Rubber Conveyor Belt at China, EP630 *4 ply 600mm width Conveyor belts ,EP300 rubber belt rubber Conveyor belt ,Conveyor belt for coal mine EP100 4PLY 4.5+1.5 mm ,EP300 4ply Conveyor Belts used in copper mine ,China high-efficiency extension rubber conveyor belt ,3ply(3+2)/Rubber Conveyor Belt for Stone Crusher ,Coal Mine Industry Multi-ply Rubber EP conveyor belt ,Coal mine nn-100 rubber conveyor belting ,Correas Transportadoras de caucho