Teflon conveyor belt

1) PTFE Teflon conveyor belt  :
PTFE Teflon conveyor belt choose fine fiberglass and Kevlar as basic materials, knitted by special equipment and coated with fine PTFE so finally make one kind of special seamless fusing machine belt. Seamless fusing machine belt overcomes former problems of traditional joint fusing machine belt such as bad stability, ruptures, and deflecting for different girth on two sides at the joint. The using life of seamless PTFE Fusing Machine Belt are much longer than all kinds of joint PTFE Fusing Machine Belt.

No.	Item	Normal size
1	400	400×1520/ 400×1830
2	450	450×1530/450×1830
3	460	460×1530/460×1830
4	500	500×1530/500×1880,500×1830/500×2450
5	500	500×1735/500×2020
6	600	600×2440/600×2675
7	600	600×2100/600×4200
8	600	600×1400/600×2000
9	700	700×2450/700×2890
10	900	900×2450
11	915	915×2450/915×3540
12	1000	1000×3950/1000×6730
13	1000	1000×3200
14	1010	1010×3200/1010×6000, 1010×2830/1010×4720

 

2) 2ply Fusing Machine Belt:
PTFE Teflon conveyor belt with static-resistance varnished cloth inside and tearing-resistance fiberglass cloth outside, 2ply belt has a great improvement on its intensity, long using life, well balanced thickness, excellent deflecting preventing capacity, smooth surface, it’s better for super thin fabric fusing.

3) Common Seam Joint Fusing Machine Belt:
Seam joint fusing machine belt is made of fine material. The surface is smooth and luster and the price is competitive. It can substitute imported high price belts.

Our Fusing Machine Belt Features:
1. High temperature resistance and adherence resistance;
2. Good tensile strength, preventing deflecting;
3. Excellent capability of resistance of static;
4. mooth surface, more suits for super thin lining;
5. Flex fatigue resistance, durable, long using life;

 

PTFE Belting

Monster Beltingmanufactures various of belts with its material of smooth ptfe fabric,ptfe mesh, kevla, silicon rubber etc to custom specifications, depending on each customer’s individual needs. To help determine the best belt for your unique application, you need provide the following information for our experienced technical manager to discuss your requirement.

PTFE teflon seamless belt 

PTFE(Teflon) coated fiberglass open mesh belt select fine fiberglass, Kevlar or Nomex as basic weaving material, coated with excellent PTFE(Teflon) resin to make it into various of PTFE(Teflon) conveyor belt.

PTFE teflon seamless belt Properties:

1. Outstanding temperature resistance  (from -170ºC to +260ºC)

2. Resistant to corrosive agents

3. Low thermal mass

4. Controlled porosity

5. Superior non-stick surface, easy to clean

6. Dimensional stability

7.Non-toxic

teflon conveyor belt Usage:

PTFE(Teflon) open mesh belts are used in screen printing to transport imprinted materials through drying ovens and cooling chambers. These belts are long lasting and perform well over a wide range of operating temperatures.

Fiber teflon belt fabrication department can supply a wide variety of splices and edge reinforcements in order to respond customer’s specific applications.

  Choosing the Right Material
There are a number of factors to keep in mind when choosing the belting material for your application:

* Temperature Range – Our ptfe fabrics have the capabilities of withstanding -70°C- +260°C constant

operating temperatures.

* Pliability – If the material is to track around pulleys that drive the belt, the diameter of the pulley is critical.

The smaller the roller the more flexible the belt must be. Vichen’s thinner materials (0.010” and under) are more pliant than the heavier coated fabrics.
* Release Qualities – The surface finishes of our materials range from a rough, semi-porous finish to

a super smooth surface. The release or fabric impression results desired will be a determining factor.
* Strength – Options to be considered are breaking, tensile and tear strength. How much of a load the belt

carries, how fast it moves and how tightly it will be tensioned all must be considered.